TNT Customs Front Axle Truss - Ford HP Dana 44 (radius arm style)
shown with optional add-ons
SIMPLIFY THAT AXLE SWAP!
Ships fully assembled!
Constructed of 3/16" steel plate
Runs full length of the axle
Manufactured in the USA using American Steel
FULL WIDTH AXLE TRUSS FOR YOUR HIGH PINION DANA 44
If you're thinking of swapping a HP Dana 44 from a Radius arm Ford application into your Jeep® TJ, LJ UnLimited, Cherokee XJ, ZJ Grand Cherokee or MJ Comanche, this product will interest you. The TNT High Pinion Dana 44 Axle Truss not only makes this swap a breeze to perform but is an easy way to strengthen your front housing and end up with beefier axle brackets and components at the same time. The most interesting part is that our design allows you to install the truss without having to measure - our optional UCA mounts, coil buckets and trackbar mounts are jig welded to the truss during assembly making your axle install easy enough just about anyone can do it. We let you choose your mounts allowing you to get a truss that better corresponds to your specific application.
Mounts constructed of 3/16" steel plate
DS & PS Upper Control Arm mounts ship with new bushings
Slotted Coil Buckets for easy wheelbase adjustment
Coil mounts include shock & factory trackbar mounting provisions
Trackbar mounts available for Over-the-knuckle and Crossover/Hysteer applications
Swaybar mounts constructed of 3/8" steel plate
Manufactured in the USA using American Steel!
**This truss is designed to fit a HP Dana 44 out of Ford Radius arm applications that came with weld on wedges only. HP Dana 44s with the hollow casting wedges are not compatible.
- All of our trusses require welding to install. We strongly recommend using a certified welder for any welding tasks.
- TNT HD High Clearance Lower Control Arm mounts are required when pushing axle forward.
- Due to the various combinaton of mounts available trusses are built to order so please allow 5-7 business days before shipping. Product received may differ from that shown in the above pictures.
- OTK or Hysteer Tracbar mounts, Upper control arm mounts and coil mounts come pre-welded when added to the truss, Lower Control Arm mounts and swaybar mounts do not come welded to the truss. Our HD coil buckets include mounting provisions for retaining the factory trackbar and shock mounts.
- Disclaimer regarding Wheelbase Changes: TNT is not responsible for the incompatibility or failure of another manufacturers control arms. TNT recommends checking with your suspension manufacture regarding compatibility of their control arms before performing any wheelbase changes.
Formerly part number TT-1104